Traducción y análisis de palabras por inteligencia artificial ChatGPT
En esta página puede obtener un análisis detallado de una palabra o frase, producido utilizando la mejor tecnología de inteligencia artificial hasta la fecha:
- cómo se usa la palabra
- frecuencia de uso
- se utiliza con más frecuencia en el habla oral o escrita
- opciones de traducción
- ejemplos de uso (varias frases con traducción)
- etimología
voltage divider - traducción al italiano
![corona ball]] probe tip and ground is connected to the other end of the divider via the black cable. The divider output (V<sub>OUT</sub>) appears on the connector adjacent to the cable.](https://commons.wikimedia.org/wiki/Special:FilePath/HighVoltageDividerProbe.jpg?width=200 "corona ball]] probe tip and ground is connected to the other end of the divider via the black cable. The divider output (V<sub>OUT</sub>) appears on the connector adjacent to the cable.")
.svg?width=200)
.svg?width=200)
.svg?width=200)
![A [[three-phase]] bank of voltage regulators used to control the voltage on long AC power distribution lines. This bank is mounted on a wooden pole structure. Each regulator weighs about 1200 kg and is rated 576 kVA.](https://commons.wikimedia.org/wiki/Special:FilePath/Distribution Voltage regulators.JPG?width=200 "A [[three-phase]] bank of voltage regulators used to control the voltage on long AC power distribution lines. This bank is mounted on a wooden pole structure. Each regulator weighs about 1200 kg and is rated 576 kVA.")
Wikipedia
In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin). Voltage division is the result of distributing the input voltage among the components of the divider. A simple example of a voltage divider is two resistors connected in series, with the input voltage applied across the resistor pair and the output voltage emerging from the connection between them.
Resistor voltage dividers are commonly used to create reference voltages, or to reduce the magnitude of a voltage so it can be measured, and may also be used as signal attenuators at low frequencies. For direct current and relatively low frequencies, a voltage divider may be sufficiently accurate if made only of resistors; where frequency response over a wide range is required (such as in an oscilloscope probe), a voltage divider may have capacitive elements added to compensate load capacitance. In electric power transmission, a capacitive voltage divider is used for measurement of high voltage.
